- LED Illumination system incorporating Nikon’s fly-eye lens design to achieve uniform
brightness across the entire FOV
- LIM (Light Intensity Management) system that incorporates the following features:
- Automatically sets the brightness levels for each objective to the brightness levels
established by the user
- ECO Mode: Automatically turns off the LED illuminator and powers down the
microscope after a period of inactivity programmed by the user
- Display shows the current nosepiece address, objective mag, the brightness level,
LIM brightness control, and ECO mode status
- Reduced repetitive motion during long hours of slide observations by use of the LIM system
that automatically adjusts the illumination brightness when changing objective mags and
keeping users focused on their task by not having to move their hands to readjust the
brightness each time objective magnifications are changed
- Sleep energy saving mode button turns off the LED illuminator while maintaining power to
the LIM so settings are retained when the microscope is reactivated
- Built-in Field Diaphragm for Kohler Illumination
- Nosepiece accommodation for 5 objectives
- Dedicated CFI E Plan Acromat objectives with 20mm FOV including a new 60x E Plan
Acromat objective
- 22mm image FOV capability when combined with F22 optical components (CFI-60
objectives, Ci series tube lenses and CFI 10x/22 eyepieces)
- Four observational methods in additional to Bright-Field Illumination are available with the
use of accessory items:
- Phase Contrast Observation
- Dark-Field Observation
- Simple Polarization Observation
- Diascopic Fluorescence Observation
- Recessed secondary Eyepiece Tube screw prevents the head from detaching from main
body
- Captive primary Eyepiece Tube screw for securing the head during use and storage
- Ergonomically designed 45 degree eyepiece tube lens angle compared to the E200’s 30
degree eyepiece tube lens angle
- Ergonomically located stage height which is about 50mm lower than the E200 stage height
- Ergonomically positioned course/fine focus knobs located on both sides of the microscope.
- Stage x-direction movement changed to a belt drive system making it safer and less
obstructive to manipulate glass slides on the stage by eliminating the stage protrusion which
exists with an x-direction rack and pinion system.
- Stage height focus limit knob for setting the stage upper travel to the point of best focus
when observing samples under high mag and preventing the stage from going any higher
which could cause glass slides to come into contact with the objective
- Intermediate modules include Eye-level Risers, Face-to-Face and Side-By-Side Teaching
units
- Integrated AC adapter storage space with provision to store the power cord without having
to unplug it from the AC adapter.
- Reduced weight and multiple carry points for easier lifting, carrying and moving from
storage shelves to workspace
brightness across the entire FOV
- LIM (Light Intensity Management) system that incorporates the following features:
- Automatically sets the brightness levels for each objective to the brightness levels
established by the user
- ECO Mode: Automatically turns off the LED illuminator and powers down the
microscope after a period of inactivity programmed by the user
- Display shows the current nosepiece address, objective mag, the brightness level,
LIM brightness control, and ECO mode status
- Reduced repetitive motion during long hours of slide observations by use of the LIM system
that automatically adjusts the illumination brightness when changing objective mags and
keeping users focused on their task by not having to move their hands to readjust the
brightness each time objective magnifications are changed
- Sleep energy saving mode button turns off the LED illuminator while maintaining power to
the LIM so settings are retained when the microscope is reactivated
- Built-in Field Diaphragm for Kohler Illumination
- Nosepiece accommodation for 5 objectives
- Dedicated CFI E Plan Acromat objectives with 20mm FOV including a new 60x E Plan
Acromat objective
- 22mm image FOV capability when combined with F22 optical components (CFI-60
objectives, Ci series tube lenses and CFI 10x/22 eyepieces)
- Four observational methods in additional to Bright-Field Illumination are available with the
use of accessory items:
- Phase Contrast Observation
- Dark-Field Observation
- Simple Polarization Observation
- Diascopic Fluorescence Observation
- Recessed secondary Eyepiece Tube screw prevents the head from detaching from main
body
- Captive primary Eyepiece Tube screw for securing the head during use and storage
- Ergonomically designed 45 degree eyepiece tube lens angle compared to the E200’s 30
degree eyepiece tube lens angle
- Ergonomically located stage height which is about 50mm lower than the E200 stage height
- Ergonomically positioned course/fine focus knobs located on both sides of the microscope.
- Stage x-direction movement changed to a belt drive system making it safer and less
obstructive to manipulate glass slides on the stage by eliminating the stage protrusion which
exists with an x-direction rack and pinion system.
- Stage height focus limit knob for setting the stage upper travel to the point of best focus
when observing samples under high mag and preventing the stage from going any higher
which could cause glass slides to come into contact with the objective
- Intermediate modules include Eye-level Risers, Face-to-Face and Side-By-Side Teaching
units
- Integrated AC adapter storage space with provision to store the power cord without having
to unplug it from the AC adapter.
- Reduced weight and multiple carry points for easier lifting, carrying and moving from
storage shelves to workspace